This is a dedicated threading system for the K31 rifle. Full instructions are included for this 14mmx1 system and it is virtually "fool-proof".
The kit is designed to thread K31 muzzles to accept the Swiss Products Barrel Damper and the Muzzle Brake.
Threaded Barrel Damper - Nill Stock:
This damper is design specific for the K31 rifle and is calibrated for the GP11 cartridge and any hand load with a projectile in the 165gr to 200gr range.
Proven to cut group sizes by a 38% minimum.
Type P/S Diopter $445:
Presenting the Flagship of the Swiss Products line... The new Type P/S (steel) Diopter. This Diopter is calibrated to range from 75 yards to 1,000 yards, is made of steel and is Eye Relief Adjustable. No rail changes are necssary. The Type P/S will accept both Anschutz and Gehmann Irises.
zfk55 Replacement Scope Mount - Nill Stock:
This machined, steel mount replaces the original issue zfk55 mount allowing the use of any Weaver style rings.
1911/k11 Drill & Tap Scope Mount - $60:
Quality machined steel mount requires drilling and tapping for 3 10/32 screws on left side of receiver.
Accepts 3/8" scope rings or like type. Typically aligns correctly with pre-drilled "Alpine" type 1911 conversions to .308
Recoil Pad Adapter - $21:
This Adapter allows the user to install a recoil pad on the K31 rifle without altering the issue stock whatsoever.
Threaded Muzzle Brake - $52:
This brake is designed specifically for the K31 rifle and shows an effective range to 23% felt recoil, which makes it THE most effective .308 rifle brake on the market.
Bipod Adaptor - $105:
This is a bipod adaptor system that will accept any Harris style Bipod. It requires NO alteration of the rifle whatsoever and allows the shooter to move the bipod from forward of the trigger group to midway up the forearm. Solid and rifle friendly.
Clamp-On Muzzle Brake - $102::
This brake clamps on the K31 muzzle with no alteration to the rifle whatsoever. Extremely effective.
k31 Drill & Tap Scope Mount - Nill Stock
Quality machined steel mount requires drilling and tapping for 3 10/32 screws on left side of receiver.
Accepts 3/8" scope rings or like type.
Clamp On Scope Mount - $112:
Requires no alteration to rifle.
ZFK 55 Bipod Adaptor - Nill Stock:
ZFThis adaptor replaces the front receiver screw that attatches the forend mount of the issue bipod. It allows the locking screw to engage and allows the use of any Harris style Bipod.
Tikka T3 Short Action:
Additional Stock
* K-31 firing pin - $20 - click here to order
* K-31 extrators - $15- click here to order
* K-31 Muzzle protector caps - $12- click here to order
* Stripper clips K-31 / K-11 - $13- click here to order
* K-31 Micro rear sight - $45- click here to order
* K-31 Firing pin springs - $12- click here to order
* K-31 bolt body - $45- click here to order
* K-31 / -11 front blade sight - $12- click here to order
* Cocking handle K-31 - $45- click here to order
* Bolt handle K-31 - $45- click here to order
* K-31 bayonet scabbard frog - $ 195- click here to order
* K-31 Sling - $ 25- click here to order
* K-31 Brass $75 Per 100 - click here to order
* K-31 loaded ammo Highland $29/ 100 174 FMJ - click here to order
